Can You Use Steam Cleaner on Walls?

Can You Use Steam Cleaner on Walls?

Yes, you can clean your walls using a steam cleaner as long as you are gentle. Steam cleaners are easy-to-use and effective cleaning instruments that can be used on a wide range of surfaces, including walls, ceilings, floors, tiles, clothes, and other hard surface cleanings without using chemicals. Their high-temperature steam can successfully remove wrinkles form clothing, dirt and stains from walls, but be mindful of the type of paint or wallpaper quality.

Why You Need to Steam Clean Your Walls?

There are several reasons why you may need to clean your walls:

1: Remove Grime To Cleanse the Wall

Steaming can help to improve the overall appearance of your walls and make your home look cleaner and more welcoming. It helps remove dirt, dust, and grime that has accumulated over time and makes your home a clean and pleasant place to live.

1: Get Rid of Stains and FingerPrints

To get rid of stains and marks that have been left behind by spills, splashes, or fingerprints. Cleaning your walls using hand-held steam cleaners could restore their original colour that is hidden underneath the layers of dust and dirt and make them look new again.

1: Clear Mould and Spider Webs

Wall surfaces that are not regularly cleaned can become breeding grounds for mould and mildew, and even become a spot for many spiders and insects which can spread health problems and damage the structure of your home. In this case, steaming prevents the growth of mould, mildew and spider webs, by clearing the micro-organisms and bacteria from the surface and air.

1: Improve Ambiance Lightening and Air Quality

Walls that are dirty and full of dust can contribute to poor indoor lighting, air quality, and bad breathing, and affects your physical health. It can even cause skin problems and allergies and impact overall health. That’s why regular cleaning can help to improve the air quality in your home.

1: Maintain Your Home’s Curb Appeal

Cleaning your home’s floors, ceiling, and walls is crucial for preserving its curb appeal, which is recommended to clean the exterior as well as the indoor appearance clean and colourful.

It is crucial for household health as well as the health of your home. So, keep your property’s value up by maintaining it, and utilising a steam cleaner is the best way to preserve a nice image of your home.

How to Clean Your Walls Using Steam Cleaner?

Before you begin, there are a few things you should consider to avoid damaging your wall with a steam cleaner.

1: Spot Check

If you haven’t already considered it, a spot-check effort will save you money on renovations. You can try the steam cleaner on a small, inconspicuous area of the wall to ensure that the steam cleaner does not do any harm.

2: Clean Dirt Not Paint

You should be informed that you need to clean the dirt on the wall rather than the paint, so don’t stay in one location for too long; instead, move on after a few seconds.

3: Dripping Water

Also, don’t mind water dripping down the wall. It is common, and you should keep a handy piece of cloth for absorbing that water so that it does not dry on the clean wall to become a watermark.

4: Good Quality Paint Wins Steam Cleaning

When you try steam cleaning on a side spot and find everything appears to be in order and the paint appears to be solid, with no peeling or colour differences, you are ready to use steam cleaning on whole all surfaces.

5: Bad Quality Paint Avoids Steam Cleaning

If the wall paint is in bad condition, extremely old, or unmaintained, it is advisable to clean it off and allow the steam cleaner to remove it entirely for repainting your wall to give it a new appearance because damaged wallpaper or poor paint cannot withstand the heat of the steam cleaner.

To use steam cleaner safely on walls, follow these steps:

  1. Make sure the steam cleaner is filled with clean water, and allow it to heat up until it is ready to use.
  2. Hold the steam cleaner about six inches away from the wall surface, and move it slowly in a back-and-forth motion.
  3. Start at the top of the wall and work your way down, overlapping each pass to ensure that the entire surface is evenly covered.
  4. After you have cleaned the entire wall, allow it to air dry or use a clean, dry towel to wipe away any remaining moisture.
  5. Repeat the process as necessary to clean the entire wall or to spot-clean any particularly dirty or stained areas.

It is important to use the steam cleaner carefully and to avoid pressing too hard against the wall, keep an inch or two distance as this could cause the paint to peel or the wallpaper to come off.

Will a Steam Cleaner Cause Paint Damage?

True, not all wallpapers are suitable for steam cleaning and may peel off. Other than bad surface conditions, water-based paint is usually one weak place to avoid steam cleaning. This is why you should test the steam cleaner in a safe spot before using it on the entire wall. You may then make changes based on how the steam affects the paint, and keep the pressure low.

It is also important to use the steam cleaner properly and avoid applying the steam directly onto the paint for an extended period. This can cause the paint to blister or peel, especially if it is old or in poor condition. So don’t stick to one spot for long, and don’t keep the steam cleaner nearby.

You should notice the pressurised steam output. The extreme heat might cause the paint to split or dry out. If this occurs, the paint may crack or peel, causing damage to the wallpaper or underlying surface.

These circumstances lead me to conclude that steam cleaners are awful for some paint walls but fantastic for many surfaces cleaning.

How to Strip Old Paint Using Steam Cleaner?

Steam is a quick and effective method for removing paint from walls. It is a formal and harmless approach that may be used instead of infrared strippers, heat guns, dangerous scraper blades, as well as harmful chemicals.

All you need to do is swiftly heat the paint with a robust and high-pressure hand-held steam cleaner to heat the paint and then peel away the dry paint from the surface using a putty knife. Of course, it makes the wall a little filthy, but once done, you may paint it with any colour and embellishments you like.

How You Can Do It?

As we previously indicated, removing paint is just the reverse of cleaning dirty walls.

You accomplish the effects of removing paint with steam, simply follow the instructions opposite.

  1. Load the steam cleaner’s water tank and connect it to a wall socket.
  2. Keep the steam cleaner near the wall and stay in one spot for a prolonged period to cause the paint to lose its adherence to the surface and easily peel off.
  3. The longer you stay in one area, the more paint will fall off the wall; thus, you can easily remove the loose paint from your walls.
  4. Once you see the paint surface become dry and flaking, scrape it away with a putty knife or a scraper.
  5. Apply these steps to the whole wall surface, and your wall is ready for the new paint job.

Conclusion

Overall, if used properly and with caution, a steam cleaner is a safe and effective way to clean painted walls without the use of chemicals, it can readily remove stubborn filth, grime, and stains. And while performing other tasks such as stripping paint. You need maximum pressure to generate maximum heat to remove the paint. You can do it yourself if you are aware of the steps we described above. However, keep in mind that it is important to let the walls completely dry before putting in new paint or wallpaper.

Ben Wells
Ben Wells is a tech enthusiast and expert in the field of auto accessories and electronic household items. With a background as a PC critic and editor for a tech blogger, Ben has spent the past four years writing objectively about home appliances and leisure technologies for BestB. Known for his unbiased coverage, Ben is passionate about staying up-to-date on the latest technological advancements in the automotive and home electronics industries. When he's not reviewing the latest products, Ben enjoys camping and travelling.